Subaru IMPREZA GD 2007 Series Manual page 2480

asieps_tobira_IM_US.book 79 ページ ２０１２年１月１７日 火曜日 午後３時４８分
(6) Install the service hole plug and gasket.
NOTE:
Use a new gasket.
(1)
(1) Piston
(2) Piston pin
(3) Snap ring
(4) Gasket
(7) Set the parts so that the #3 and #4 cylinders
are on the upper side. Following the same pro-
cedures as used for #1 and #2 cylinders, install
the pistons and piston pins.
22) Install the water pipe.
23) Install the baffle plate.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
Cylinder Block
ME-00140
T2
T1
(5)
(3)
(4)
(2)
(5) Service hole plug
(6) Service hole cover
(7) O-ring
ME(H4DOTC)-79
(6)
(7)
(3)
(2)
Tightening torque:N·m (kgf-m, ft-lb)
T1: 6.4 (0.65, 4.7)
T2: 70 (7.1, 51.6)
24) Install the oil strainer to the cylinder block.
NOTE:
Use new O-rings.
Tightening torque:
10 N·m (1.0 kgf-m, 7.4 ft-lb)
MECHANICAL
(1)
ME-02394