Show Qos Class-Map - Dell Z9500 Command Reference Manual

Usage
After the IP DSCP bit is set, other QoS services can then operate on the bit settings.
Information

show qos class-map

View the current class map information.
Z9500
Syntax
show qos class-map [class-name]
Parameters
class-name
Defaults none
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.1
Example
Dell#show qos class-map
Class-map match-any CM
Related class-map
Commands
1510
(Optional) Enter the name of a configured class map.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Match ip access-group ACL
— identifies the class map.
Quality of Service (QoS)