Show Multicast Flow-Map - Dell PowerConnect J-EX4200-24T Software Manual

show multicast flow-map

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Table 270: show multicast flow-map Output Fields
Field Name Field Description
Name Name of the flow map.
Policy Name of the policy associated with the flow map.
Cache timeout value assigned to the flow map.
Cache-timeout
Bandwidth setting associated to the flow map.
Bandwidth
Whether or not adaptive mode is enabled for the flow map.
Adaptive
Name of the flow map.
Flow-map
Whether or not adaptive mode is enabled for the flow map.
Adaptive
Bandwidth
Redundant sources defined for the same destination group.
Redundant Sources
Chapter 80: Operational Mode Commands for IGMP Snooping and Multicast
show multicast flow-map
<brief | detail>
<logical-system (all | logical-system-name)>
show multicast flow-map
<brief | detail>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display configuration information about IP multicast flow maps.
—Display configuration information about IP multicast flow maps on all systems.
none
—(Optional) Display the specified level of output.
brief | detail
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show multicast flow-map on page 2190
show multicast flow-map detail on page 2190
Table 270 on page 2189 describes the output fields for the
command. Output fields are listed in the approximate order in which they appear.
—(Optional) Perform this operation on all logical
show multicast flow-map
Levels of Output
All levels
All levels
All levels
All levels
none
detail
detail
detail
2189