Show Qos Class-Map - Dell C9000 Series Reference Manual

Version
7.6.1.0
7.5.1.0
7.4.1.0
6.1.1.1
Usage Information After the IP DSCP bit is set, other QoS services can then operate on the bit settings.

show qos class-map

View the current class map information.
C9000 Series
Syntax
show qos class-map [class-name]
Parameters
class-name
Defaults none
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.1
Description
Introduced on the S-Series.
Introduced on the C-Series.
E-Series Only: Added support for mac-dot1p.
Introduced on the E-Series.
(Optional) Enter the name of a configured class map.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Quality of Service (QoS) 1827