Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Syntax
qos map dscp-mutation
no qos map dscp-mutation [
Parameters
•
in-dscp—Specifies up to 8 DSCP values to map, separated by spaces.
(Range: 0–63)
•
out-dscp—Specifies up to 8 DSCP mapped values, separated by spaces.
(Range: 0–63)
Default Configuration
The default map is the Null map, which means that each incoming DSCP
value is mapped to the same DSCP value.
Command Mode
Global Configuration mode.
User Guidelines
This is the only map that is not globally configured. It is possible to have
several maps and assign each one to a different port.
Example
The following example changes DSCP values 1, 2, 4, 5 and 6 to DSCP
Mutation Map value 63.
Console(config)#
show qos map
Use the show qos map EXEC mode command to display the QoS mapping
information.
Syntax
show qos map [dscp-queue | dscp-dp | policed-dscp | dscp-mutation]
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
756
Quality of Service (QoS) Commands
CLI\files\QoS.fm
in-dscp
out-dscp
to
in-dscp
]
qos map dscp-mutation
1 2 4 5 6
to
63
Advertisement
Table of Contents
