Match Mac Dot1P; Match Mac Vlan - Dell Z9500 Reference Manual

match mac dot1p

Configure a match criterion for a class map based on a dot1p value.
Z9500
Syntax
match mac dot1p {dot1p-list}
Parameters
dot1p-list
Defaults none
Command CLASS-MAP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.5.1.0
7.4.1.0
Usage To access this command, enter the class-map command. After the class map is
Information identified, you can configure the match criteria.
Related class-map
Commands

match mac vlan

Configure a match criterion for a class map based on VLAN ID.
Z9500
Syntax
match mac vlan number
Parameters
number
Defaults none
1454
Enter a dot1p value. The range is from 0 to 7.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Available on the C-Series and S-Series.
Added support for the DSCP Marking option.
Introduced.
— identifies the class map.
Enter the VLAN ID. The range is from 1 to 4094.
Quality of Service (QoS)