Match Mac Dot1P - Dell S6100 Configuration Manual

Version
8.3.11.1
8.3.7.0
8.2.1.0
7.5.1.0
7.4.1.0
Usage Information To access this command, enter the class-map command. After the class map is identified, you can configure the
match criteria.
Related Commands
•

match mac dot1p

Configure a match criterion for a class map based on a dot1p value.
Syntax match mac dot1p {dot1p-list}
Parameters
dot1p-list
Defaults none
Command Modes CLASS-MAP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.5.1.0
1274 Quality of Service (QoS)
Description
Introduced on the Z9000.
Introduced on the S4810.
Available on the C-Series and S-Series.
Added support for the DSCP Marking option.
Introduced on the E-Series.
class-map — identifies the class map.
Enter a dot1p value. The range is from 0 to 7.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Available on the C-Series and S-Series.
Added support for the DSCP Marking option.