Write Core - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

write core

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
write core [ standby-srp | slot slotNumber ] [ force ] [ reason reasonText ]
Command introduced in JunosE Release 7.3.0.
Reboots the active SRP module, the standby SRP module, or the module in a specified
slot, and writes the core dump to a file. There is no no version.
standby-srp—Specifies the standby SRP module
slotNumber—Number of a selected slot in the router; for ERX7xx models, a number in
the range 0–6; for ERX14xx models, a number in the range 0–13; for the ERX310 router,
a number in the range 0–2; for the E120 router, a number in the range 0–5; for the E320
router, a number in the range 0–16
force—Prompts for confirmation to reboot when the router is in certain states, such as
during the synchronization of SRP modules, that can lead to a loss of configuration
data or an NVS corruption
NOTE: The force keyword is available when you specify a slot only if that
slot is an SRP module slot.
reasonText—Alphanumeric text string (1–255 characters long) that explains the request
for a core dump and logs it in the reboot
Privileged Exec
Chapter 9: U, V, W, and Y Commands
1427