Write Memory - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

write memory

Syntax
Release Information
Description
Mode
1428
write memory
Command introduced before JunosE Release 7.1.0.
Saves all outstanding (unsaved) configuration changes to nonvolatile storage; an exact
alias of the copy running-configuration startup-configuration command. Available if
the router is in either Automatic Commit mode or Manual Commit mode. If issued while
in Automatic Commit mode, the CLI notifies you that the command is not necessary, but
allows you to proceed. There is no no version.
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.