Table 72: Show Mpls Interface And Show Mpls L2Transport Interface Output - Juniper JUNOSE SOFTWARE FOR E SERIES 11.0.X - BGP AND MPLS CONFIGURATION GUIDE 2009-12-30 Configuration Manual

JUNOSe 11.0.x BGP and MPLS Configuration Guide
Table 72: show mpls interface and show mpls l2transport interface Output Fields
564
Monitoring MPLS Layer 2 Interfaces for Layer 2 Services over MPLS
Field Name Field Description
MPLS shim interface Interface specifier
Remote PE address Address of the remote PE router for the layer 2 circuit
Virtual circuit ID VC ID number for the interface
Group ID Group ID number for the interface
Control word Configuration of the control word
Sequence number Statement regarding configuration of sequence number
Relay format Configuration of relay format
ATM VPI/VCI range Starting and ending (inclusive) virtual path identifiers and virtual
circuit identifiers of the reserved VC range and whether the range
specification is activated on the line module for transportation of
ATM cells that belong to multiple VCs over a single pseudowire.
ATM cell aggregation Concatenation of multiple ATM cells to be sent in a single
MPLS-labeled packet for an ATM port, enabled or disabled.
ATM cell aggregation Maximum number of ATM cells that the router can concatenate in
maximum cells per packet a single packet; if this value is not configured, "ATM cell
aggregation: disabled" appears instead of this field. Displayed for
an ATM port (ATM AAL5 over ATM major interface).
ATM cell aggregation Identifier (1, 2, or 3) of the ATM Martini cell packing timer that
timeout timerID detects timeout of the cell collection threshold; if this value is not
configured, "ATM cell aggregation: disabled" appears instead of
this field. Displayed for an ATM port (ATM AAL5 over ATM major
interface).
Administrative state Administrative state, enabled or disabled
Operational state Statement regarding operational state of interface
Operational MTU Maximum transmission unit for the interface
Received, Sent Statistics for MPLS traffic received or sent on the interface
packets Number of packets received or sent
bytes Number of bytes received or sent
error Number of packets that are dropped for some reason at receipt or
before being sent
discards Number of packets that are discarded because of lack of buffer
space at receipt or before being sent
received mtu MTU specified in received packets
queue, traffic class, bound Queue and traffic class bound to the specified interface
to