Table 159: Show Ip Interface Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

Meaning
Copyright © 2010, Juniper Networks, Inc.
Table 159 on page 705 lists the show ip interface command output fields.

Table 159: show ip interface Output Fields

Field Name
interface
interface status
HTTP Redirect Url
line protocol
Description
Link up/down trap
Internet Address
IP Statistics Rcvd
local destination
hdr errors
addr errors
unkn proto
discards
IP Statistics Frags
reasm ok
reasm req
reasm fails
frag ok
frag req
frag fails
IP Statistics Sent
generated
Chapter 28: Monitoring Service Manager
Field Description
Interface type and specifier.
Status of the interface.
Url to which a subscriber's initial web browser session
is redirected
Status of the line protocol.
Text description or alias if configured for the interface
Status of SNMP link up/down traps on the interface
IP address of the interface
Frames with this router as destination
Number of packets containing header errors
Number of packets containing addressing errors
Number of packets received containing unknown
protocols
Number of discarded packets
Number of reassembled packets
Number of requests for reassembly
Number of reassembly failures
Number of packets fragmented successfully
Number of frames requiring fragmentation
Number of packets unsuccessfully fragmented
Number of packets generated
705