Table 17: Show Ppp Interface Mlppp Output Fields - Juniper JUNOSE SOFTWARE 11.2.X - LINK LAYER CONFIGURATION GUIDE 7-7-2010 Configuration Manual

Software for e series broadband services routers link layer configuration guide
Table of Contents

Advertisement

Meaning
Copyright © 2010, Juniper Networks, Inc.
...
1 mlppp interfaces found
Table 17 on page 355 lists the show ppp interface mlppp command output fields.

Table 17: show ppp interface mlppp Output Fields

Field Name
PPP interface mlppp bundleName
PPP multilink member-interface
interfaceName
Link interface administrative
status
PPP multilink multiclass
PPP multilink multiclass classes
PPP multilink multiclass
fragmentation
PPP multilink multiclass
reassembly
mlppp interfaces found
Time since last baseline
receive class, transmit class
Interface statistics
Chapter 10: Configuring Multiclass Multilink PPP
Field Description
Name and state (up or down) of the MLPPP interface
Name and state (up or down) of the MLPPP member
link interface
Administrative state of the member link interface:
open (enabled) or closed (disabled)
Configuration of multiclass MLPPP on the MLPPP
interface: enabled or disabled
Number of multilink classes created on the MLPPP
interface: 1 through 8
Configuration of fragmentation of the multiclass
MLPPP interface: enabled or disabled. If
fragmentation is enabled then the command also
lists the QoS traffic classes on which fragmentation
is enabled.
Configuration of reassembly of the multiclass MLPPP
interface: enabled or disabled. If reassembly is
enabled then it also lists the QoS traffic classes on
which reassembly is enabled.
Number of MLPPP interfaces configured
When baselining is configured, the time since the last
baseline was set is displayed in hours:minutes:seconds
or days/hours format
Number of multilink classes configured on the MLPPP
bundle
Statistics for data received by (in) and transmitted
(out) on the MLPPP interface:
packets—Number of packets received and
transmitted on the interface
octets—Number of octets received and transmitted
on the interface
errors—Number of errors received and transmitted
on the interface
discards—Number of packets discarded on receipt
or discarded before they were transmitted
fragments—Number of fragments received and
transmitted on the interface
355

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JUNOSE SOFTWARE 11.2.X - LINK LAYER CONFIGURATION GUIDE 7-7-2010 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Junose 11.2

Table of Contents