Debounce-Time - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

Chapter 5: D Commands

debounce-time

debounce-time interval
Syntax
no debounce-time
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the interval to wait before bringing up a RIP interface that was brought down.
Description
The no version restores the default value, 10.
interval Seconds in the range 0–60
Options
Address Family Configuration, Router Configuration
Mode
479
debounce-time