Match Level - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

match level

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
match level { backbone | level-1 | level-1-2 | level-2 | stub-area }*
no match level [ backbone | level-1 | level-1-2 | level-2 | stub-area ]
Command introduced before JunosE Release 7.1.0.
Matches import routes for the specified type. The no version removes the match clause
from a route map unless you specify a value, in which case only that value is removed
from the match clause.
backbone—Specifies OSPF backbone area
level-1—Specifies Level 1 area
level-1-2—Specifies Level 1 and a level 2 area
level-2—Specifies Level 2 subdomain
stub-area—Specifies OSPF NSSA area
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Policy List Configuration, Route Map Configuration
Chapter 13: M Commands
1275