Match Ipv6 Address - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

match ipv6 address

Syntax
Release Information
Description
Options
Mode
1272
match ipv6 address
{ accessListName [ accessListName ]* | prefix-list prefixListName
[ prefixListName ]* }
no match ipv6 address [ [ accessListName ]* | prefix-list [ prefixListName ]* ]
Command introduced before JunosE Release 7.1.0.
Matches any routes that have a destination network number address that is permitted
by an access list or prefix list. The no version removes all address match clauses from a
route map unless you specify either an access list or a prefix list, in which case only the
list match is removed from the route map.
accessListName—String of up to 32 alphanumeric characters
prefixListName—Name of a single prefix list; string of up to 32 characters
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Policy List Configuration, Route Map Configuration
Copyright © 2010, Juniper Networks, Inc.