Honda Accord 2008 Manual page 1824

07/11/02 09:39:02 61TA0000_200_0257
Exterior Trim
Front Grille Cover Replacement
2-door
NOTE: Take care not to scratch the front grille and the
body.
1. Remove the front grille cover (A).
–1 Remove the clips (B, C).
–2 Pass both hood edge cushions (D) through the
–3 Pass the hood latch knob (F) through the hole
＊０１
Fastener Locations
B
D
F
E
2. Install the cover in the reverse order of removal,
and note these items:
• If the clips are damaged or stress-whitened,
replace them with new ones.
• Push the clips into place securely.
ＴＡ０８ＡＢ２Ｊ１８５７３４３０２１１ＫＢＡＴ００
holes in the cover by pulling the rear edge of
the cover up, and slide the entire cover
rearward to release the front edge of it from
under the front grille (E).
in the cover.
NOTE: To remove the clips, pry the inner clip
up at the edge near the line (G) on its head.
: Clip, 11 C : Clip, 2
G G
G G
C
B
A
B
B
B B
B
B
B
B
B
B
D
A
E
4-door
NOTE: Take care not to scratch the front grille and the
body.
1. Remove the front grille cover (A).
–1 Remove the clips (B, C).
–2 Detach the hooks (D) from both front fender
trim (E).
–3 Pass both hood edge cushions (F) through the
holes in the cover by pulling the rear edge of
the cover up, and slide the entire cover
rearward to release it from the groove (G) of
the front grille (H).
–4 Pass the hood latch knob (I) through the hole in
the cover.
Fastener Locations
: Clip, 6
B
B
C
C
E
F
I
H
G
H
2. Install the cover in the reverse order of removal,
and note these items:
• If the clips are damaged or stress-whitened,
replace them with new ones.
• Push the clips and the hooks into place securely.
ＴＡ０８ＡＢ４Ｊ１８５７３４３０２１１ＫＢＡＴ００
C : Clip, 2
D
B B
A
B
D
B
B
C
E
F
A
20-255 20-255
＊０１