Honda Accord 2008 Manual page 1825

07/11/02 09:39:02 61TA0000_200_0258
Exterior Trim
Front Grille Replacement
Special Tools Required
KTC trim tool set SOJATP2014
Available through the American Honda Tool and
Equipment Program; call 888-424-6857
Grille Replacement - 2-door
NOTE: Take care not to scratch the front bumper.
1. Remove the front bumper (see page 20-237).
2. Remove the front grille (A).
–1 Remove the clips.
–2 Detach both hooks (B) of the gr ille from the
＊０１
Fastener Locations
: Clip, 10
C
D
B
3. Install the grille in the reverse order of removal,
and note these items:
• If the clips are damaged or stress-whitened, and
replace them with new one.
• Push the clips and the hooks into place securely.
20-256
front bumper (C), and release the ribs (D) of the
grille from the groove (E) of the bumper by
pulling the grille out.
A
B
A
D
C D
Grille Replacement - 4-door
NOTE: Take care not to scratch the front bumper and
the body.
1. Remove the front grille cover (see page 20-255).
2. Remove the front grille (A).
–1 Remove the clips.
–2 Detach both hooks (B) of the gr ille from the
Fastener Locations
: Clip, 4
D
E
B
C
D
A
E
3. Install the grille in the reverse order of removal,
and note these items:
• If the clips are damaged or stress-whitened, and
replace them with new one.
• Push the clips and the hooks into place securely.
ＴＡ０８Ａ００Ｊ１８５７３４３０２０１ＫＢＡＴ００
front bumper (C), and release the ribs (D) of the
grille from the groove (E) of the bumper by
pulling the grille out.
C
A
B
A
E
C
D
＊０２