Subaru IMPREZA GD 2007 Series Manual page 2466

asieps_tobira_IM_US.book 65 ページ ２０１２年１月１７日 火曜日 午後３時４８分
Cylinder Head
MECHANICAL
6) Install the cam sprocket. <Ref. to ME(H4DOTC)-
56, INSTALLATION, Cam Sprocket.>
7) Install the timing belt. <Ref. to ME(H4DOTC)-50,
INSTALLATION, Timing Belt.>
8) Install the timing belt cover. <Ref. to
ME(H4DOTC)-47, INSTALLATION, Timing Belt
Cover.>
9) Install the crank pulley. <Ref. to ME(H4DOTC)-
46, INSTALLATION, Crank Pulley.>
10) Install the V-belts. <Ref. to ME(H4DOTC)-44,
INSTALLATION, V-belt.>
C: DISASSEMBLY
1) Remove the valve lifter.
2) Compress the valve spring and remove the
valve spring retainer key. Remove each valve and
valve spring.
NOTE:
• Mark each valve to prevent confusion.
• Pay careful attention not to damage the lips of in-
take valve oil seals and exhaust valve oil seals.
• Keep all the removed parts in order for re-install-
ing in their original positions.
ST1 498267600 CYLINDER HEAD TABLE
ST2 499718000 VALVE SPRING REMOVER
ST2
ST1
ME-00124
ME(H4DOTC)-65