asieps_tobira_IM_US.book 63 ページ 2012年1月17日 火曜日 午後3時48分
7) Measure the thrust clearance of camshaft with
setting the dial gauge at end of camshaft. If the
thrust clearance exceeds the limit or there is un-
even wear, replace the caps and cylinder head as a
set. If necessary replace the camshaft.
Standard:
0.068 — 0.116 mm (0.0027 — 0.0046 in)
Service limit:
0.14 mm (0.0055 in)
Camshaft
ME-00121
ME(H4DOTC)-63
MECHANICAL