Subaru IMPREZA GD 2007 Series Manual page 2448

asieps_tobira_IM_US.book 47 ページ ２０１２年１月１７日 火曜日 午後３時４８分
14.Timing Belt Cover
A: REMOVAL
NOTE:
Perform the work with the engine installed to body
when replacing a single part.
1) Remove the V-belts. <Ref. to ME(H4DOTC)-44,
REMOVAL, V-belt.>
2) Remove the crank
ME(H4DOTC)-46, REMOVAL, Crank Pulley.>
3) Remove the timing belt cover (LH) (A).
4) Remove the timing belt cover (RH) (B).
5) Remove the front timing belt cover (C).
(B)
B: INSTALLATION
1) Install the front timing belt cover (C).
Tightening torque:
5 N·m (0.5 kgf-m, 3.6 ft-lb)
2) Install the timing belt cover (RH) (B).
Tightening torque:
5 N·m (0.5 kgf-m, 3.6 ft-lb)
3) Install the timing belt cover (LH) (A).
Tightening torque:
5 N·m (0.5 kgf-m, 3.6 ft-lb)
(B)
4) Install the crank pulley. <Ref. to ME(H4DOTC)-
46, INSTALLATION, Crank Pulley.>
5) Install the V-belts. <Ref. to ME(H4DOTC)-44,
INSTALLATION, V-belt.>
C: INSPECTION
Check the cover for damage.
Timing Belt Cover
pulley. <Ref. to
(A)
(C)
ME-00064
(A)
(C)
ME-00064
ME(H4DOTC)-47
MECHANICAL