Subaru IMPREZA GD 2007 Series Manual page 2396

asieps_tobira_IM_US.book 25 ページ ２０１２年１月１７日 火曜日 午後３時４８分
8. Engine Oil Cooler
A: REMOVAL
1. EXCEPT FOR STI MODEL
1) Set the vehicle on a lift.
2) Lift up the vehicle.
3) Remove the under cover.
4) Drain the engine oil.
5) Drain engine coolant.
6) Remove the water by-pass pipe between oil
cooler and water pump.
7) Remove the engine
LU(H4DOTC)-28, REMOVAL, Engine Oil Filter.>
8) Remove the oil cooler connector and remove the
oil cooler.
Engine Oil Cooler
LU-00040
oil filter. <Ref. to
LU(H4DOTC)-25
9) Remove the adapters (1) and (2).
(G)
(A)
(H)
(B)
(C)
(G)
(A) Adapter (1)
(B) Adapter connector
(C) Adapter (2)
(D) Oil cooler
(E) Oil cooler connector
(F) Nipple
(G) Gasket
(H) O-ring
LUBRICATION
(F)
(D)
(E)
LU-02263