asieps_tobira_IM_US.book 15 ページ 2012年1月17日 火曜日 午後3時48分
D: ASSEMBLY
1) Assemble the front oil seal by using ST.
NOTE:
Use a new front oil seal.
ST 499587100
OIL SEAL INSTALLER
2) Apply a coat of engine oil to inner and outer ro-
tors.
3) Assemble the inner and outer rotors in their orig-
inal positions.
4) Assemble the oil relief valve and install relief
valve spring and plug.
NOTE:
Use a new gasket.
Oil Pump
ST
LU-00021
LU(H4DOTC)-15
5) Assemble the oil pump cover.
Tightening torque:
T1: 5.4 N·m (0.55 kgf-m, 4.0 ft-lb)
T2: 44 N·m (4.5 kgf-m, 32.5 ft-lb)
(D)
(C)
(B)
(A)
(F)
(A) Oil seal
(B) Oil pump case
(C) Inner rotor
(D) Outer rotor
(E) Oil pump cover
(F) Relief valve
(G) Relief valve spring
(H) Plug
(I) Gasket
LUBRICATION
T1
(E)
(G)
(I)
(H)
T2
LU-02134