Subaru IMPREZA GD 2007 Series Manual page 2397

asieps_tobira_IM_US.book 26 ページ ２０１２年１月１７日 火曜日 午後３時４８分
LUBRICATION
2. STI MODEL
1) Set the vehicle on a lift.
2) Lift up the vehicle.
3) Remove the under cover.
4) Drain the engine oil.
5) Drain engine coolant.
6) Remove the water by-pass pipe between oil
cooler and water pump.
7) Remove the engine
LU(H4DOTC)-28, REMOVAL, Engine Oil Filter.>
8) Remove the oil cooler connector and remove the
oil cooler.
(D)
(A)
(B)
(C)
(A) Gasket
(B) Oil cooler
(C) Oil cooler connector
(D) Nipple
Engine Oil Cooler
LU-00040
oil filter. <Ref. to
LU-02237
LU(H4DOTC)-26
B: INSTALLATION
1. EXCEPT FOR STI MODEL
1) Install in the reverse order of removal.
2) Touch the adapter (1) knock pin (A) to the cylin-
der block rib (B) to install the adapter (1).
3) Install the adapter (2).
4) Touch the engine oil cooler stopper (A) to the
adapter (2) rib (B) to install the engine oil cooler.
(A)
(A)
(B)
LU-00042
(B)
LU-00043