asieps_tobira_IM_US.book 38 ページ 2012年1月17日 火曜日 午後3時48分
MECHANICAL
17) Remove the ATF cooler pipe from frame. (AT
model)
18) Remove the center exhaust pipe. <Ref. to
EX(H4DOTC)-10, REMOVAL, Center Exhaust
Pipe.>
19) Remove the bolts and nuts which hold lower
side of transmission to engine.
20) Remove the nuts which install front cushion
rubber onto front crossmember.
21) Separate the clutch release fork from the re-
lease bearing. (MT model) <Ref. to CL-18, RE-
MOVAL, Release Bearing and Lever.>
22) Separate the torque converter clutch from drive
plate. (AT model)
(1) Lower the vehicle.
(2) Remove the service hole plug.
(3) Remove the bolts which hold torque con-
verter clutch to drive plate.
(4) Remove other bolts while rotating the crank-
shaft using socket wrench.
Engine Assembly
23) Remove the pitching stopper.
24) Remove the fuel hoses from the fuel pipes us-
ing the ST. <Ref. to FU(H4DOTC)-70, REMOVAL,
Fuel Delivery, Return and Evaporation Lines.>
CAUTION:
• Be careful not to spill fuel.
ME-00040
• Catch the fuel from hoses using a container
or cloth.
ST 42099AE000 CONNECTOR REMOVER
ME-02688
(A) Fuel delivery hose
(B) Return hose
(C) Evaporation hose
25) Support the engine with a lifting device and
wire ropes.
ME-00044
ME(H4DOTC)-38
MT-00069
(A)
ST
(B)
(C)
FU-02752
ME-00047