Subaru IMPREZA GD 2007 Series Manual page 2437

asieps_tobira_IM_US.book 36 ページ ２０１２年１月１７日 火曜日 午後３時４８分
MECHANICAL
9. Engine Assembly
A: REMOVAL
1) Set the vehicle on a lift.
2) Open the front hood fully and support with the
front food stay.
3) Collect the refrigerant from A/C system. <Ref. to
AC-19, Refrigerant Recovery Procedure.>
4) Release the fuel
FU(H4DOTC)-55, RELEASING OF FUEL PRES-
SURE, PROCEDURE, Fuel.>
5) Disconnect the ground cable from the battery.
6) Open the fuel flap lid, and remove the fuel filler
cap.
7) Remove the air cleaner case and air intake boot.
<Ref. to IN(H4DOTC)-10, REMOVAL, Air Cleaner
Case.>
8) Remove the radiator from vehicle. <Ref. to
CO(H4DOTC)-25, REMOVAL, Radiator.>
9) Remove the coolant filler tank. <Ref. to
CO(H4DOTC)-35, REMOVAL,
Tank.>
10) Remove the secondary air pump. <Ref. to
EC(H4DOTC)-9, REMOVAL,
Pump.>
11) Disconnect the A/C pressure hoses from A/C
compressor.
12) Remove the intercooler. <Ref. to IN(H4DOTC)-
13, REMOVAL, Intercooler.>
Engine Assembly
pressure. <Ref. to
FU-00009
Coolant Filler
Secondary Air
ME-02686
ME(H4DOTC)-36
13) Disconnect the following connectors and ca-
bles.
(1) Engine harness connectors
(2) Engine ground terminal
(3) Left and right engine ground cables
ME-03008
ME-00028
FU-00131
FU-00132