Subaru IMPREZA GD 2007 Series Manual page 2392

asieps_tobira_IM_US.book 21 ページ ２０１２年１月１７日 火曜日 午後３時４８分
6. Oil Pressure Switch
A: REMOVAL
1) Remove the generator from the bracket. <Ref. to
SC(H4SO)-14, REMOVAL, Generator.>
2) Disconnect the terminal from oil pressure switch.
3) Remove the oil pressure switch.
Oil Pressure Switch
B: INSTALLATION
1) Apply liquid gasket to the oil pressure switch
threads.
Liquid gasket:
THREE BOND 1324 (Part No. 004403042) or
equivalent
LU-00036
2) Install the oil pressure switch onto engine block.
Tightening torque:
25 N·m (2.5 kgf-m, 18.1 ft-lb)
LU-00037
3) Connect the terminal to the oil pressure switch.
4) Install the generator to the bracket. <Ref. to
SC(H4SO)-14, INSTALLATION, Generator.>
C: INSPECTION
Check the oil pressure switch installation portion for
oil leakage and oil seepage.
LU(H4DOTC)-21
LUBRICATION
LU-00038
LU-00037
LU-00036