asieps_tobira_IM_US.book 43 ページ 2012年1月17日 火曜日 午後3時48分
11.Preparation for Overhaul
A: PROCEDURE
1) After removing the engine from body, secure it to
ST in the following procedure.
ST1
498457000 ENGINE STAND ADAPTER
RH
ST2 498457100
ENGINE STAND ADAPTER
LH
ST3 499817100
ENGINE STAND
ST2
ST1
2) In this section the procedures described under
each index are all connected and stated in order.
The procedure for overhauling of the engine will be
completed when you go through all steps in the
process.
Therefore, in this section, to conduct the particular
procedure within the flow of a section, you need to
go back and conduct the procedure described pre-
viously in order to do that particular procedure.
Preparation for Overhaul
ST3
ME-00057
ME(H4DOTC)-43
MECHANICAL