asieps_tobira_IM_US.book 17 ページ 2012年1月17日 火曜日 午後3時48分
5. Oil Pan and Strainer
A: REMOVAL
1) Set the vehicle on a lift.
2) Remove the front wheels.
3) Disconnect the ground cable from the battery.
4) Disconnect the connector from the mass air flow
and intake air temperature sensor.
5) Remove the air intake boot and air cleaner upper
cover.
6) Remove the intercooler.
<Ref. to IN(H4DOTC)-13, REMOVAL, Intercool-
er.>
Oil Pan and Strainer
7) Remove the pitching stopper.
8) Remove the radiator upper brackets.
FU-00009
9) Support the engine with a lifting device and wire
ropes.
LU-00026
10) Lift up the vehicle.
CAUTION:
When lifting up the vehicle, raise up wire ropes
at the same time.
11) Remove the under cover.
LU-00070
12) Drain the engine oil. <Ref. to LU(H4DOTC)-10,
REPLACEMENT, Engine Oil.>
13) Remove the front exhaust pipe. <Ref. to
EX(H4DOTC)-8, REMOVAL, Front Exhaust Pipe.>
LU(H4DOTC)-17
LUBRICATION
ME-00213
CO-00090
LU-00028