Ethernet module QoS commands
Syntax
[no] congestion-profile <profile-no>
Table 225: Variable definitions
<profile-no>
[no]
Example
AG/configure/interface/ethernet (6/12)/qos/module# congestion-
profile 1
configure interface ethernet qos module default-queue
Use this command to to specify the queue assigned to all untagged packets ingressing on the
interface. To force output-queue assignment for both untagged and tagged packets, you can
use the force-all parameter.
Syntax
[no] default-queue <queue-no> [force-all]
Table 226: Variable definitions
<queue-no>
[force-all]
[no]
Example
AG/configure/interface/ethernet (6/12)/qos/module# default-queue 7
226
Command Line Reference
Variable
Variable
Comments? infodev@avaya.com
Value
The congestion profile to apply. Valid ranges:
1-4
Removes the profile from the interface.
Value
The output queue assigned. Valid Range:
1-8
Optional parameter. If specified, output-
queue assignment is forced for both
untagged and tagged packets. Otherwise, it
is assigned only for untagged packets.
Resets the default queue to 8.
August 2013