Show Swlog - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

Hide thumbs Also See for OmniSwitch 6250:

Table of Contents

Switch Logging Commands

show swlog

Displays switch logging information (e.g., switch logging status, log devices, application IDs with non-

default severity level settings).

Syntax Definitions

Platforms Supported

OmniSwitch 6250

Usage Guidelines

This command can also be used on the secondary CMM.

-> show swlog

Switch Logging is :

- INITIALIZED.

Log Device(s)

-------------

socket ipaddr 11.1.1.1

socket ipaddr 12.1.1.1

socket ipaddr 13.1.1.1

socket ipaddr 14.1.1.1

All Applications have their trace level set to the level 'info' (6)

output definitions

Application ID

Release History

Release 6.6.1; command was introduced.

OmniSwitch 6250 CLI Reference Guide

The Application ID (subsystem) for which the Severity Level is not set

to the info (6) default setting.

The Severity Level of the above-referenced Application ID. Levels

include (2), error (3), alert (4), warning (5), info (6), debug1 (7),

debug2 (8), and debug3 (9).

November 2009