Show Swlog - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Switch Logging Commands

show swlog

Displays switch logging information (e.g., switch logging status, log devices, application IDs with non-
default severity level settings).
show swlog
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
This command can also be used on the secondary CMM.
Examples
-> show swlog
Switch Logging is :
- INITIALIZED.
- RUNNING.
Log Device(s)
-------------
flash
console
socket ipaddr 11.1.1.1
socket ipaddr 12.1.1.1
socket ipaddr 13.1.1.1
socket ipaddr 14.1.1.1
All Applications have their trace level set to the level 'info' (6)
output definitions
Application ID
Level
Release History
Release 7.1.1; command was introduced.
OmniSwitch CLI Reference Guide
The Application ID (subsystem) for which the Severity Level is not set
to the info (6) default setting.
The Severity Level of the above-referenced Application ID. Levels
include (2), error (3), alert (4), warning (5), info (6), debug1 (7),
debug2 (8), and debug3 (9).
March 2011
show swlog
page 35-13