Uni Multicast-Control Multicast-Address - 3Com S7906E Command Reference Manual

Parameters
uni-number: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of
UNIs can be up to 80.
vlan-id: Multicast VLAN ID, in the range 1 to 4094. &<1-50> means that you can provide up to 50 VLAN
IDs for this argument.
all: Specifies all the multicast VLAN IDs.
Description
Use the uni multicast vlan command to add a UNI to the specified multicast VLAN(s).
Use the undo uni multicast vlan command to remove a UNI from the specified multicast VLAN(s).
This command takes effect only when the ONU works in the IGMP snooping mode.
Related commands: multicast-mode.
Examples
# Add UNI 1 to multicast VLAN 200 and multicast VLAN 3000.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] uni 1 multicast vlan 2000 3000

uni multicast-control multicast-address

Syntax
uni uni-number multicast-control multicast-address { multicast-address [ to multicast-address ] }
&<1-10> [ source-ip ip-address [ to ip-address ] ] rule { deny | permit [ channel-limit channel-number ]
| preview time-slice preview-time [ preview-interval interval-time | preview-times preview-times
[ reset-interval reset-interval-time ] ]* }
undo uni uni-number
multicast-address ] ] &<1-10>
View
ONU port view
Default Level
1: Monitor level
Parameters
uni-number: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of
UNIs can be up to 80.
multicast-address: Multicast IP address(es). &<1-10> means that you can specify up to 10 multicast IP
addresses/multicast IP address ranges.
ip-address: IP address of the multicast source
deny: Denies access.
permit: Permits access.
channel-number: Number of channels that can be accessed at the same time, in the range 1 to 5.
multicast-control multicast-address
2-32
[ multicast-address [ to