Multicast-Control Host-Aging-Time; Multicast-Mode - 3Com S7906E Command Reference Manual

multicast-control host-aging-time

Syntax
multicast-control host-aging-time host-aging-time
undo multicast-control host-aging-time
View
ONU port view
Default Level
1: Monitor level
Parameters
host-aging-time: Aging time of multicast group member port in multicast control mode, in seconds. It is
in the range 200 to 1000 and defaults to 260.
Description
Use the multicast-control host-aging-time command to configure the aging time of multicast group
member port in multicast control mode.
Use the undo multicast-control host-aging-time command to restore the default aging time of
multicast group member port in multicast control mode.
By default, the aging time of a multicast group member port is 260 seconds.
Note that this command is available in multicast control mode only.
Examples
# Configure the aging time multicast group member port in multicast control mode as 500 seconds.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] multicast-control host-aging-time 500

multicast-mode

Syntax
multicast-mode { igmp-snooping | multicast-control }
undo multicast-mode
View
ONU port view
Default Level
2: System level
Parameters
igmp-snooping: Specifies the IGMP Snooping mode.
multicast-control: Specifies the multicast control mode.
2-18