Onu Port-Isolate Enable - 3Com S7906E Command Reference Manual

critical
debugging
emergencies
errors
information
notifications
warnings
[Sysname-Onu3/0/1:1] onu-event log enable level errors
# Disable the OLT attached to ONU 3/0/3:1 from reporting log information to the ONU.
<Sysname> system-view
[Sysname] interface onu 3/0/3:1
[Sysname-Onu3/0/3:1] undo onu-event log enable
Table 2-6 onu-event log enable level command output description
Field
emergencies
alerts
critical
errors
warnings
notifications
information
debugging

onu port-isolate enable

Syntax
onu port-isolate enable
undo onu port-isolate enable
View
ONU port view
Parameters
None
Description
Use the onu port-isolate enable command to isolate all UNI ports of the ONU.
Use the undo onu port-isolate enable command to disable UNI port isolation.
By default, UNI port isolation is disabled.
Examples
# Isolate all UNI ports attached to the ONU corresponding to ONU 3/0/1:1.
<=CRIT level messages to OLT
<=DEBUG level messages to OLT
<=EMERG Level Switch to OLT
<=ERR level messages to OLT
<=INFO level messages to OLT
<=NOTICE level messages to OLT
<=WARN level messages to OLT
Severity level
0 Indicating that the system is unavailable.
1 Errors that need to be corrected immediately.
2 Critical Information.
3 Errors.
4 Warning Information.
5 Normal information that needs to be noticed.
6 Normal prompt information that needs to be recorded.
7 Debugging information.
(severity=2)
(severity=7)
(severity=0)
(severity=3)
(severity=6)
(severity=5)
(severity=4)
Remarks
2-20