Sample Enable - 3Com S7906E Command Reference Manual

Default Level
3: Manage level
Parameters
None
Description
Use the monitor enable command to enable alarm monitor in the EPON system.
Use the undo monitor enable command to disable alarm monitor in the EPON system.
By default, alarm monitor is enabled in the EPON system.
Examples
# Enable the alarm monitor of the EPON system
<Sysname> system-view
[Sysname] ftth
[Sysname-ftth] monitor enable

sample enable

Syntax
sample enable
undo sample enable
View
FTTH view
Default Level
3: Manage level
Parameters
None
Description
Use the sample enable command to enable system statistics sampling.
Use the undo sample enable command to disable system statistics sampling.
By default, system statistics sampling is enabled.
Examples
# Enable statistics sampling in the EPON system.
<Sysname> system-view
[Sysname] ftth
[Sysname-ftth] sample enable
3-20