3Com S7906E Command Reference Manual page 409

Feature
QoS
Port mirroring
802.1X feature
In an EPON system, users and the multicast source can exchange multicast traffic with each other only
if the corresponding multicast table entries exist on the ONUs and OLT:
In FTTH view, bind multicast IP addresses with multicast VLANs. Then, the multicast table entries
will be created on the ONUs and OLT when users send IGMP report messages.
You can use the igmp-snooping host-join and igmp-snooping static-group commands in ONU
port view to create multicast table entries on the OLT, but not on the ONUs. In that case, multicast
traffic cannot be exchanged between them.
Command
bandwidth downstream
bandwidth downstream
high-priority enable
bandwidth downstream
policy enable
qos apply policy
qos
cos-local-precedence-map
qos sp
qos wrr
qos wfq
qos priority
qos trust
uni classification-marking
uni port-policing
display qos policy interface
display qos sp interface
display qos trust interface
display qos wrr interface
display qos wfq interface
uni mirroring-port
uni monitor-port
display dot1x
dot1x
dot1x guest-vlan
dot1x handshake
dot1x max-user
dot1x port-control
{ authorized-force | auto |
unauthorized-force }
dot1x supp-proxy-check
{ logoff | trap }
dot1x multicast-trigger
reset dot1x statistics
4-4
Related section
QoS commands
Port mirroring commands
802.1X commands