Shutdown Management-Vlan-Interface - 3Com S7906E Command Reference Manual

View
ONU port view
Default Level
2: System level
Parameters
uni-number: UNI number, in the range 1 to the maximum number of UNI ports supported by the ONU.
By default, the maximum number is 80.
Description
Use the reset counters uni command to clear the counter information of the specified UNI port.
If no UNI is specified, the counter information of all the UNIs of the ONU is cleared.
This command takes effect on H3C ONUs only.
To use this command, make sure the ONU is up.
Related commands: display uni-information.
Examples
# Clear the counter information of UNI port 1.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] reset counters uni 1

shutdown management-vlan-interface

Syntax
shutdown management-vlan-interface
undo shutdown management-vlan-interface
View
ONU port view
Default Level
2: System level
Parameters
None
2-26