3Com S7906E Command Reference Manual page 347

queue 4 : state:1 , value:65535
queue 5 : state:1 , value:65535
queue 6 : state:1 , value:0
queue 7 : state:1 , value:0
queue 8 : state:1 , value:0
Multicast-mode : multicast control
Table 2-4 display vendor-specific information command output description
Field
gigabit ethernet interface : not support
fast ethernet interface : support
voip service : not support
tdm ces service : not support
gigabit ethernet ports number : 0
fast ethernet ports number : 4
fast ethernet ports :
0x1
0x2
0x3
0x4
pots ports number : 0
e1 ports number : 0
upstream queues number : 4
Maximum queues per port upstream : 4
downstream queues number : 4
Maximum queues per port downstream : 4
battery backup : not support
forward error correction ability : support
forward error correction mode : disable
queue sets number : 2
queue 1 : state:1 , value:0
queue 2 : state:1 , value:0
queue 3 : state:1 , value:0
queue 4 : state:1 , value:65535
queue 5 : state:1 , value:65535
queue 6 : state:1 , value:0
queue 7 : state:1 , value:0
queue 8 : state:1 , value:0
Whether the ONU has Gigabit Ethernet ports
Whether the ONU has fast Ethernet ports
Whether the ONU supports Voice over IP (VoIP)
service
Whether the ONU supports the TDM Circuit
Emulation Service (CES)
Number of Gigabit Ethernet ports
Number of fast Ethernet ports
Fast Ethernet port numbers: 1, 2, 3, 4
Number of Plain Old Telephone Service (POTS)
ports
Number of E1 ports
Number of upstream queues
Maximum number of upstream queues
supported per port
Number of downstream queues
Maximum number of downstream queues
supported per port
Whether battery backup is supported
Whether Forward Error Correction (FEC) is
supported
Whether FEC is enabled
Number of queue sets supported
Queue states and thresholds. If the value of
state is 0, it means the queue is disabled; if the
value of state is 1, it means the queue is
enabled.
2-9
Description