Update Onu Filename - 3Com S7906E Command Reference Manual

The sum of the minimum uplink bandwidths configured for all the created ONU ports under an OLT port
cannot exceed 921600 kbps, namely, 900 Mbps.
Examples
# Set the ONU port's minimum uplink bandwidth to 9600 kbps and maximum uplink bandwidth to 12800
kbps.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] upstream-sla minimum-bandwidth 150 maximum-bandwidth 200
Info: The minimum-bandwidth of upstream is 9600 Kbps
Info: The maximum-bandwidth of upstream is 12800 Kbps

update onu filename

Syntax
update onu filename file-url
undo update onu
View
OLT port view, ONU port view
Default Level
2: System level
Parameters
file-url: Update file name, a string of 1 to 64 characters composed of the device name and the ONU
update file name. If no device name is specified, it is the name of the Flash of the SRPU. The files in the
salve SRPU cannot be used for the update.
Description
Use the update onu filename command to remotely update ONU(s) by using the update file stored on
the OLT.
Use the undo update onu command to cancel the remote ONU update configuration.
Executing this command in OLT port view will update all the ONUs corresponding to the created
ONUs under the OLT port.
Executing this command in ONU port view will update the ONU corresponding to the ONU port.
Note that this is a configuration command. After it is configured in OLT port view or ONU port view, the
update command will be executed on the corresponding ONU port:
If the ONU corresponding to the ONU port is online and matches the update file, the ONU is
updated directly.
If the ONU corresponding to the ONU port is online but does not match the update file, the ONU
cannot be updated.
2-42