Uni Igmp-Snooping Fast-Leave; Uni Mdi - 3Com S7906E Command Reference Manual

Description
Use the uni flow control command to enable flow control for a UNI.
Use the undo uni flow-control command to disable flow control.
By default, flow control is disabled on a UNI.
Examples
# Enable flow control for UNI 1.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] uni 1 flow-control

uni igmp-snooping fast-leave

Syntax
uni uni-number igmp-snooping fast-leave
undo uni uni-number igmp-snooping fast-leave
View
ONU port view
Default Level
2: System level
Parameters
uni-number: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of
UNIs can be up to 80.
Description
Use the uni igmp-snooping fast-leave command to enable fast leave on the UNI.
Use the undo uni igmp-snooping fast-leave command to disable this function.
By default, fast leave is disabled on a UNI.
Examples
# Enable fast leave on UNI 1.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] uni 1 igmp-snooping fast-leave

uni mdi

Syntax
uni uni-number mdi { across | auto | normal }
undo uni uni-number mdi
2-30