Alarm Port Bit-Error-Rate Enable; Alarm Registration-Error Enable - 3Com S7906E Command Reference Manual

[Sysname] interface olt 3/0/1
[Sysname-Olt3/0/1] alarm onu-over-limitation enable

alarm port bit-error-rate enable

Syntax
alarm port bit-error-rate enable
undo alarm port bit-error-rate enable
View
ONU port view, OLT port view, FTTH view
Default Level
2: System level
Parameters
None
Description
Use the alarm port bit-error-rate enable command to enable the port bit error rate alarm.
Use the undo alarm port bit-error-rate enable command to disable the port bit error rate alarm.
When both the total number of error bits and bit error rate of the data transferred between the OLT and
ONU exceed the alarm thresholds, the port bit error rate alarm occurs.
The threshold setting of the port bit error rate alarm is the same as that of the bit error rate alarm.
Related commands: alarm bit-error-rate.
By default, the port bit error rate alarm is enabled.
Examples
# Enable the port bit error rate alarm on OLT 3/0/1.
<Sysname> system-view
[Sysname] interface olt3/0/1
[Sysname-Olt3/0/1] alarm port bit-error-rate enable

alarm registration-error enable

Syntax
alarm registration-error enable
undo alarm registration-error enable
View
OLT port view, FTTH view
Default Level
2: System level
3-17