Display Epon-Multicast Information - 3Com S7906E Command Reference Manual

display epon-multicast information

Syntax
display epon-multicast information
View
ONU port view
Default Level
1: Monitor level
Parameters
None
Description
Use the display epon-multicast information command to display multicast control information.
Examples
# Display multicast control information when the multicast mode of the ONU is IGMP snooping.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] display epon-multicast information
ONU is not in multicast-control mode.
# Display multicast control information when the multicast mode of the ONU is multicast control mode
but no multicast control information is generated.
[Sysname-Onu3/0/1:1] display epon-multicast information
Multicast-control information: None.
# Display multicast control information when the multicast mode of the ONU is multicast control mode
and multicast control information is generated.
[Sysname-Onu3/0/1:1] display epon-multicast information
Multicast-control information:
-------------------------------
UNI number 1:
Multicast vlan 10
Current channel list:
multicast ip:225.0.0.2
status:permit
Multicast vlan 10
Current channel list:
multicast ip:225.0.0.3
status:preview
preview times:16
preview remain time:144s
2-5