Uni Auto-Negotiation - 3Com S7906E Command Reference Manual

Description
Use the shutdown management-vlan-interface command to shut down the management VLAN
interface of the ONU.
Use the undo shutdown management-vlan-interface command to bring up the management VLAN
interface of the ONU.
By default, a management VLAN interface is down.
After the undo shutdown management-vlan-interface command is used:
A management VLAN interface is down if all the Ethernet ports in the management VLAN of the
ONU are down;
A management VLAN interface is up if one or more Ethernet ports in the management VLAN of the
ONU are up.
Examples
# Bring up the management VLAN interface of the ONU.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] undo shutdown management-vlan-interface

uni auto-negotiation

Syntax
uni uni-number auto-negotiation
undo uni uni-number auto-negotiation
View
ONU port view
Default Level
2: System level
Parameters
uni-number: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of
UNIs can be up to 80.
Description
Use the uni auto-negotiation command to enable auto-negotiation on a UNI port.
Use the undo uni auto-negotiation command to disable auto-negotiation on a UNI port.
By default, auto-negotiation is enabled on a UNI port.
When auto-negotiation is enabled on a UNI port, you cannot configure the duplex state, MDI mode, or
rate of the UNI port.
2-27