Alarm Local-Stable Enable; Alarm Oam Critical-Event Enable - 3Com S7906E Command Reference Manual

[Sysname-Olt1/0/1] alarm llid-mismatch threshold 6000

alarm local-stable enable

Syntax
alarm local-stable enable
undo alarm local-stable enable
View
OLT port view, FTTH view
Default Level
2: System level
Parameters
None
Description
Use the alarm local-stable enable command to enable the local stable alarm.
Use the undo alarm local-stable enable command to disable the local stable alarm.
The system generates a local stable alarm in case of an ONU misuse in the system, for example, when
an OAM 2.0 ONU and an OAM 3.3 ONU are mixed in the same system. (All ONUs in the same system
must adopt the same OAM version.)
The local stable alarm differs from the remote stable alarm in the following ways:
The local stable alarm is generated at the OLT side.
The remote stable alarm is generated at the ONU side and will be reported to the OLT.
By default, this function is enabled.
Related commands: alarm remote-stable.
Examples
# Enable the local stable alarm OLT 3/0/1.
<Sysname> system-view
[Sysname] interface olt 3/0/1
[Sysname-Olt3/0/1] alarm local-stable enable

alarm oam critical-event enable

Syntax
alarm oam critical-event enable
undo alarm oam critical-event enable
View
OLT port view, FTTH view
3-6