Forward-Error-Correction Enable; Ip Address - 3Com S7906E Command Reference Manual

Examples
# Configure the encryption key as test.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] encrypt key test
This operation is not supported in current version!

forward-error-correction enable

Syntax
forward-error-correction enable
undo forward-error-correction enable
View
ONU port view
Default Level
2: System level
Parameters
None
Description
Use the forward-error-correction enable command to enable forward error correction (FEC) on the
OLT and ONUs.
Use the undo forward-error-correction enable command to disable this function.
This function is disabled by default.
Examples
# Enable FEC on the OLT and ONUs.
<Sysname> system-view
[Sysname] interface onu 3/0/1:1
[Sysname-Onu3/0/1:1] forward-error-correction enable

ip address

Syntax
ip address { dhcp-alloc | ip-address mask gateway gateway }
undo ip address
View
ONU port view
Default Level
2: System level
2-14