Ftp Client Configuration Commands; Ascii - H3C s3100 series Command Manual

Hide thumbs Also See for s3100 series:

Table of Contents

minutes: Idle timeout time (in minutes), in the range 1 to 35791.

Use the ftp timeout command to set the idle timeout time of an FTP client. When the idle time of the

FTP client exceeds this timeout time, the FTP server terminates the connection with the FTP client.

Use the undo ftp timeout command to restore the default idle timeout time.

By default, the idle timeout time is 30 minutes.

If an FTP connection between an FTP server and an FTP client breaks down abnormally, but the FTP

server cannot be aware of this, the FTP server will keep this connection. This will occupy system

resources and affect other FTP users' log in. You can set an idle timeout time so that the FTP server

considers an FTP connection invalid and terminates it if no data exchange occurs on it in idle timeout

# Set the idle timeout time to 36 minutes.

<Sysname> system-view

System View: return to User View with Ctrl+Z.

[Sysname] ftp timeout 36

FTP Client Configuration Commands

In the examples of this section, if a command should be executed in FTP client view, the

configuration process for entering FTP client view will be omitted to avoid repetition. For the

configuration of the command for entering FTP client view, refer to ftp.

When executing the FTP client configuration commands in this section, confirm whether the

corresponding access rights are configured on the FTP server, for example, query file lists under a

working directory, read/download the specified files, create a directory/upload a file, and

rename/delete a file on the server. For the configuration of user access rights, refer to the FTP

server software description.

FTP client view

Show Quick Links

Table of Contents