Ftp Client Configuration Example - H3C S5500-EI series Operation Manual

Operation Manual – File System Management
H3C S5500-EI Series Ethernet Switches

2.2.3 FTP Client Configuration Example

I. Network requirements
Use your device as an FTP client to download a startup file from the FTP server.
The IP address of the FTP server is 10.1.1.1/16.
On the FTP server, an FTP user account has been created for the FTP client, with
the username being abc and the password being pwd.
The PC performs operations on the device through Console port.
II. Network diagram
FTP Client
Switch
Figure 2-2 Network diagram for FTPing an image file from an FTP server
III. Configuration procedure
# Check files on your device. Remove those redundant to ensure adequate space for
the startup file to be downloaded.
<Sysname> dir
Directory of flash:/
0 drw-
1 drw-
2 -rw-
3 -rw-
14605 KB total (6890 KB free)
<Sysname> delete /unreserved flash:/backup.cfg
# Download the startup file from the server.
<Sysname> ftp 10.1.1.1
Trying 10.1.1.1.
Press CTRL+K to abort
Connected to 10.1.1.1
220 FTP service ready
User(10.1.1.1:(none)):abc
331 Give me your password, please
10.2.2.1/16
IP network
Console
- Dec 07 2005 10:00:57
- Jan 02 2006 14:27:51
1216 Jan 02 2006 14:28:59
1216 Jan 02 2006 16:27:26
FTP Server
10.1.1.1/16
filename
logfile
config.cfg
backup.cfg
2-6
Chapter 2 FTP Configuration