Honda Accord 2008 Manual page 1860

07/11/02 09:40:28 61TA0000_200_0293
Rear Subframe Torque
NOTE:
• When installing, align both installation reference holes in the subframe with the reference holes in the body using
the frame positioning guide pin, and align both installation holes in the rear subframe mounting front stays with the
reference holes in the body using the frame positioning guide pin.
• After removing the subframe mounting bolts, be sure to replace them with new ones.
＊０３
070AG-SJAA10S
Reference hole alignment
SUBFRAME
REFERENCE HOLE
(Body side)
INSTALLATION
REFERENCE HOLE
(Subframe side)
Bottom view
To body
FRONT
INSULATOR
To body
Front
REAR SUSPENSION
SUBFRAME
8 x 1.25 mm
27 N·m
(2.75 kgf·m,
20 lbf·ft)
REAR SUBFRAME
MOUNTING FRONT
STAY
REAR SUSPENSION
SUBFRAME
INSTALLATION
REFERENCE HOLES
SPECIAL BOLT
14 x 1.5 mm
103 N·m
(10.5 kgf·m, 76 lbf·ft)
Replace.
REAR SUBFRAME
MOUNTING WASHER
To body
Bottom view
REAR
INSULATOR
Front
SPECIAL BOLT
14 x 1.5 mm
103 N·m
(10.5 kgf·m, 76 lbf·ft)
Replace.
20-291