Honda Accord 2008 Manual page 1890

07/11/02 09:40:01 61TA0000_210_0026
8. Check for continuity between the following
terminals of the HVAC control unit 24P connector
and the mode control motor 7P connector.
24P:
No. 7
No. 8
＊０１
Is there continuity?
YES
−
NO
control unit and the mode control motor.
7P:
No. 1
No. 2
HVAC CONTROL UNIT 24P CONNECTOR
Wire side of female terminals
GRN WHT
GRY YEL
MODE CONTROL MOTOR 7P CONNECTOR
Wire side of female terminals
− Go to step 9.
Repair open in the wire(s) between the HVAC
9. Check for continuity between body ground and the
HVAC control unit 24P connector No. 7 and No. 8
terminals individually.
HVAC CONTROL UNIT 24P CONNECTOR
GRN WHT
Wire side of female terminals
Is there continuity?
−
YES Repair short to body ground in the wire(s)
between the HVAC control unit and the mode
control motor.
NO − Substitute a known-good HVAC control unit,
and recheck. If the symptom/indication goes away,
replace the original HVAC control unit.
＊０２
21-25