Honda Accord 2008 Manual page 1829

07/11/02 09:39:36 61TA0000_200_0262
Exterior Trim
Cowl Cover Replacement (cont'd)
4. Remove the passenger's cowl cover (A).
–1 Remove the clips (B).
–2 Detach the clips (C, D, E) by carefully pulling
–3 Release two front hooks (F) from the body.
–4 Release the edges of the hood hinge cover (G)
＊０３
Fastener Locations
B
E
G
H
5. Install the covers in the reverse order of removal,
and note these items:
• If the clips are damaged or stress-whitened,
replace them with new ones.
• Push the clips into place securely.
• Make sure the hood hinge cover is seated on the
cowl cover securely.
20-260
the cover up.
from the front fender (H), and release the hinge
cover from the roof molding (I).
: Clip, 3 C : Clip, 3 D : Clip, 1
(Blue) (Light Blue)
: Clip, 3
G
(White)
I
E
E
E
B
D
C
C
B
B
F
A
Hood Hinge Cover Replacement
NOTE:
• Put on gloves to protect your hands.
• Take care not to damage the body.
1. Remove the hood hinge cover (A) by pulling it out
to detach the projections (B) (11 places) and the
projection (C) (one place) from the cowl cover (D).
H
C
2. Release the edges of the hinge cover from the front
fender (E), and release the hinge cover from the
roof molding (F).
3. Install the cover in the reverse order of removal,
and note these items:
• Push the projections into place securely.
• Make sure the hood hinge cover is seated on the
cowl cover securely.
A
F
E
A
B
C
B E
D
＊０４